Product introduction
Dry-type capacitive cable terminal is to make additional capacitive insulation structure outside the body insulation of cable end, and its external insulation is made of silicone rubber material.
Reference standard
GB 11017. 1 ~. 3 2002 XLPE Insulated Power Cables and Accessories with Rated Voltage of 110kV
Product model
GDZ-1/2G: Dry
D: Capacitive Type Main Insulation Z: Cable Termination
Of which: 1: Rated voltage, unit: kV
2: Guide core section, unit: mm2
Product characteristics
· Dry capacitive insulation, non-oil-filled, air-free and porcelain-free
· High anti-pollution level
· Maintenance-free, lightweight and easy to install
· High precision LRB type through current transformer can be attached
Conditions of use
· Ambient temperature:-50 ℃ ~ + 50 ℃
· Altitude: The standard design is 1000m, and when it exceeds 1000m, it shall be revised according to GB311
· Dirty Level: Level IV
Main performance indicators
· Rated voltage: 66kV, 110kV, 132kV, 145kV
· Applicable cable section: not more than 2000mm2
· Dielectric loss factor: not greater than 0.005
· Local discharge capacity: not greater than 5pC
Electrical test
60s power frequency tolerance, partial discharge test, dielectric loss and capacitance, etc
Operation and maintenance
Acceptance test can choose one: A, 15min DC 3Uo withstand voltage B, 5min AC line voltage withstand C, 24h AC phase voltage withstand maintenance-free
Instructions for Ordering
Rated voltage, guide core section and cable section dimension drawing shall be provided
Tel: 086-15933569203/010-63782913
Contact: Manager Li
Email: nuodewei@vip.com
Fax:086-010-63788532
Address: Room A, 6th Floor, Building 1, No. 1, Xinghuo Road, Fengtai District, Beijing (Park)
Scan and follow us