Welcome to Beijing Nobbel electric tech develop CO.,Ltd.!

Committed to high pressure dry products for more than ten years

An enterprise integrating development, design, production, manufacturing and sales

全国咨询热线:

13601004373/010-63782913

产品banner
Your current location: Home >> Products >> Drywall bushing

ContactContact Us

Beijing Nobbel electric tech develop CO.,Ltd.

Tel: 086-13601004373

086-010-63782913

Contact: Manager Li

Email: nuodewei@vip.com

Fax:086- 010-63788532

Website:  en.nuodewei.com

Address: Room A, 6th Floor, Building 1, No. 1, Xinghuo Road, Fengtai District, Beijing (Park)


Dry Wall Bushing (Bushing Current Transformer)

2022-07-25 11:45:44
times
Dry Wall Bushing (Bushing Current Transformer)
Details:

1. Product introduction

FCRG dry-type capacitor type wall bushing is used to gradually reduce the high voltage through the principle of capacitive voltage divider. Thereby, the high-voltage lead wire is grounded through the wall or floor, etc., and plays the role of insulating and supporting the diversion device.

It consists of a primary winding, an outer sheath, a silicone rubber shed, a pressure equalizing cover at both ends, a flange and a conductive wire clip.

No oil, no air, no porcelain, small size, light weight, low maintenance workload, fireproof and explosion-proof, and attached with high-precision through-type current transformers. Since the voltage distribution along the surface is uniform and the silicone rubber material is used as the outer insulation, the pollution flashover voltage can be further improved.


2. Main specifications and models of the product

1. FCRG dry capacitor type wall bushing, the model is FCRG series.


3. Conditions of use

1. Ambient air condition: Ambient air temperature: 45℃-45℃.

2. The selection of creepage distance should comply with the provisions of GB/T 5582.

Creepage ratio is divided into 4 grades:

Class I: 16mm/kV; Class II: 20mm/kV; Class III: 25mm/kV; Class IV: 31 mm/kV


4.The main technical parameters of the product

1. Table 1 and Table 2 show the rated voltage, system working voltage, rated current, insulation level and other parameters of the FCRG wall bushing.


Table 1

Rated voltage(Ur)kV

System working voltage(Un)kV

Rated current

Ir,A

60s power frequency withstand kV

Lightning impulse voltage kV

Dry

Wet

12

10

100、250、315、400、500、630、800、1000、1250、1600、2000、2500、3150、4000

42

30

75

24

20

58

50

125

40.5

35

95

80

200

72.5

66

147

140

325

126

110

185/230

450/550

252

220

395/460

950/1050


Table 2

Rated voltage(Ur)kV

System working voltage(Un)kV

Rated current

Ir,A

60s power frequency kV

Lightning impulse voltage kV

Dry

Wet

36

36

100、250、315、400、500、630、800、1000、1250、1600、2000、2500、3150、4000

70

70

170

52

52

95

95

250

123

123

185/230

450/550

145

145

230/275

550/650

170

170

275/325

650/750

245

245

395/460

950/1050


2. At 1.05Ur/√3 and Ur voltage, the dielectric loss factor tgδ≤0.005.

3. Partial discharge: ≤10pC under rated voltage 1.05Ur/√3.

4. The rest of the technical conditions shall comply with GB/T 4109-2008 "Insulating Bushings with AC Voltage Above 1000V".


Scan and follow us

Copyright © http://en.nuodewei.com/ Beijing Nobbel electric tech develop CO.,Ltd. Filing No.:京ICP备2022005094号-1 Specializing inWall bushing,high voltage wall bushing,transformer bushing,Welcome to inquire! Website construction:sanjin.net